Before You StartYou’ll need a few things to make handmade watercolor paint. Some, like the muller and pans, are optional. Some you may be able to find substitutes for, like the pantyhose and palette knives. But the gum Arabic is essential unless you’ve figured out another way. And in that case you’re not likely to need this primer, ha. You can buy the media already prepared, though.
- Most critical is the media. I use raw gum Arabic, honey, and boiled water. It took a little bit of experimenting to get a good ratio for the mix, but I settled on a formula that seems to work. Click to read my method of making watercolor media.
- Maybe you’ll want a muller (glass tool used on a plate to mix pigment with media), but when I first started making the paints, I didn’t have one. I used the alternative technique offered below that I use when the pigment won’t crush enough to get a smooth paste when mulling. I use a tempered glass chopping board for the plate.
- If you don’t have a muller or think you will need to strain your paint, grab an old pair of panty hose so you can cut off segments of it to use for filtering.
- Something to put your finished handmade paint in. Artists of antiquity used whatever little dish might have been handy. Seashells were commonly used. I buy pans and half-pans from Amazon. I’ve also made my own from polymer clay in a pinch. Tiny sample sized jars are nice, too.
- Something to store the paint pans in. I use small mint tins with hinged lids. I also get those from Amazon. You can use anything you want to stay organized.
- If you don’t want your pans sliding around inside your tins, if you use the tins, get some tiny little magnets to put inside the pans before you add the paint. I’ve tried adding magnet strips to the bottom but they inevitably come off.
- Disposable plastic pipetters for filling pans or adding media
- Palette knives. I use plastic so the magnets don’t hop out of the pans onto them.
Let’s go make some handmade watercolor paint.
“Rocks, clay, and soil hold the soul of the Earth.” ~ Madison Woods
Gather the materialThe clay I’m using came to the surface when we had a landslide on our property in 2015. My husband brought me a bucket full using front-end loader on the tractor, so I have plenty on hand! I’ve used it to make some fired pieces and the color turns a deep terracotta. Curious as to what color paint it would yield, I got to work. Most rocks, slate, shale, and clay can be used to make paint and some of the colors are very nice. We have a lot of different sandstone colors here, so that’s where the bulk of my colors come from. Some rocks are too hard to crush without mechanical help, so I stick to the things I can break down easily enough to avoid wrist pain.
CleanSometimes rocks are dirty. They lie around on the ground and in the creek or in the mud. So that’s to be expected. So I clean them before I use them by scrubbing them down with a brush. Clay can be cleaned too, and I have some that has been washed and filtered. It’s put aside for sculpting. But I wanted to use the clay just as it was in the ground to see what color it gave, including all the little ‘dirty’ bits. Later I’ll try it with the cleaned clay and see what color that one yields. I suspect it will be more gray. Maybe it’ll even give me the blue-gray I need for the goshawks I want to paint.
DryLet the rocks dry thoroughly before you start breaking them.
CrackLarger rocks can be broken outside using the surface of an even larger rock. This will spare your counter-tops and chopping blocks. I know this from experience. You can even use a hand-held rock to break the smaller rocks into smaller pieces. Very low-tech!
BreakBreak the rocks into small chunks so that you can hold several in the palm of your hand. Bring those inside to your mortar and pestle. Making handmade watercolor paint involves a lot of using your hands!
Get a heavy-duty stainless mortar and pestle. The one I use has dimples on the pestle and the inner surface is brushed. Works great!
Grind to smaller pieces
Make a finer powderPut a little of the powder in finer mortar and process until you’ve reached a fine dust. You can skip this step if you like your paint grainy, or if the dust is powdered enough to not be grainy. If your sieved pigment is still too grainy, try reducing it more in a smooth pestle. I didn’t need to do this for the creek shale or the clay, but I do for almost all of the other color rocks.
Mulling Handmade Watercolor PaintPut a little pile of powder on the mulling board.
- Make a little well in the center
- Fill the well with media (watercolor media is made from gum arabic)
- I let the liquid soak into surrounding pile a bit before mixing with my palette knife
- Use a muller to get the powder suspended and stable in the media
- put in pans
How to MullI haven’t found a very good explanation of this online, but there were some videos that show it being done. Maybe there are some on YouTube, but I haven’t checked there yet. This is what I’ve discovered. When you put the pile of pigment on the board, wet it good with your media but not so much that it will run off of the board. Mix it a bit with your palette knife. Take the glass muller and use it to spread the pigment all around in a circle. It’ll sound gritty. Once you’ve started spreading your pigment paste, if it’s too sticky, add a few drops (of media) with your plastic pipette. When you get it spread out, then scrape it off the muller and scrape the glass so that you’ve reconstructed your little pile in the middle. Do it again. Repeat until the paste begins to feel like butter. That is when it is done. But you can get acceptable colors without mulling so much, or at all. And here’s a tip. Your glass plate will not do a very good job until it gets good and abraded by all your initial attempts. You could mull with one of your abundant pigments for practice and it will get a start on scratching up the glass for you.
An alternative to mullingSome paints never crush finely enough. And if you don’t have the muller you’ll need another method to get the color mixed into the media. Put your pigment powder into a small jar. Add enough media to wet the powder plus have a little extra. This will ‘extract’ the color into the media. You’ll need to agitate it often for a day or so. Filter the liquid through pantyhose. It doesn’t just pour through, though, so it has to be twisted and pressure applied. If you do it this way, store the liquid in a jar in the refrigerator. Use a plastic pipette, or dropper, to fill the pans. As the pan dries and the level shrinks, keep topping it off with your stored fluid. This actually makes a much nicer pan in the end as opposed to scraping it off the mulling board directly into the pans. It does for me, anyway. Perhaps there is a trick to it that I haven’t learned yet. I hope you try your own hand at making some handmade watercolor paint from the resources surrounding you. I collect rocks, clay and soil from everywhere I go now. Eventually there will be a palette to represent the ‘soul’ of all of my favorite places. Here’s the first palette of colors I’ll have ready to sell in a few weeks. It’s named “Soul of the Ozarks” and contains five of my favorite shades from right here at Wild Ozark.
“Soul of the Ozarks” Collection no. 1